Plumbing and Domestic Heating Apprenticeship Level 3
Plumbing and Domestic Heating Technicians plan, select, install, service, commission and maintain all aspects of plumbing and heating systems. Plumbing and Domestic Heating Technicians can find themselves working inside or outside a property. Customer service skills and being tidy and respectful are important qualities as they can often find themselves working in customers’ homes as well as on building sites.
Candidates require a GCSE grade 4 or higher in Maths and English and must be employed in a relevant role for a minimum of 30 hours per week.
What will I study?
As a competent Plumbing and Heating Technician, the installation of plumbing and heating systems includes accurate measuring, marking, cutting, bending and jointing of metallic and non-metallic pipework. Appliances and equipment can include gas, oil and solid fuel boilers as well as pumps, heat emitters, bathroom furniture or controls as part of a cold water, hot water, and central heating or above ground drainage and rainwater systems. It is important for a Plumbing and Heating Technician to be able to work independently or as a team and use their knowledge and skills to ensure that both the system and appliances are appropriately selected and correctly installed, often without any supervision, and done so in a safe, efficient and economical manner to minimise waste.
Typical Job roles
Generic job titles recognised across the industry:
- Domestic Heating Engineer
- Domestic Heating Installer
- Plumbing and Domestic Heating Installer
- Plumbing and Domestic Heating Engineer
Method of delivery
Plumbing and Domestic Heating Technician apprentices attend College on a weekly day release and work for their employer the rest of the time. They will work towards the Level 3 NVQ in Plumbing and Heating which they must achieve before they can go forward to the End Point Assessment (EPA).
How will I be assessed?
The End-Point Assessment (EPA) will comprise of 5 parts:
- 50 questions to be answered within a maximum of 90 minutes.
- This will take place over seven hours and building plans are provided to the apprentice with a job specification, manufacturer’s information and data, British Standards and regulations. The apprentice is asked to complete a heating, hot water and cold water design capable of meeting the job specification.
Practical installation test
- Apprentices complete the fabrication of a pipework frame, utilising different materials and pipework components with various jointing techniques. The assessment marking criteria will include overall performance and soundness, quality of manufacture and tolerances of ±2mm. This assessment should be completed within six hours.
Practical Application test
- The apprentice will inspect a pre-installed unvented cylinder, functioning with electrical components and controls. The assessor will make alterations to the system to create faults on various components within the system.
- The apprentice is then given two hours to identify the faults and repair then re-commission the system. Finally, the apprentice will complete a service on the unvented system, according to manufacturer’s instructions, this will be undertaken within one hour.
- During the end point assessment (EPA) period which is the last three months of the apprenticeship, the apprentice will produce a log book which will record the apprentice’s achievements as they progress through the EPA period and should be supplemented with employer testimonies, performance appraisals and timely endorsements of competence from line managers. This will form the basis of the professional discussion with the EPA assessor and will last 30 minutes.
There are no specific College programme related costs, however you will be advised of any additional costs during your application and enrolment process.
Good course combinations
This is a full-time course. It is not possible to combine this course with other Vocational, T Level or
A Level programmes.
Plumbing and Domestic Heating Technician Level 3 Apprenticeship Standard which will include NVQ Level 3 in Plumbing and Heating.
Your next steps
By the end of this apprenticeship the candidate will have satisfied the requirements for registration as EngTech by the Engineering Council through the Chartered Institute of Plumbing and Heating Engineering (CIPHE) and or the Chartered Institute of Building Services Engineers (CIBSE).
On completion of the health and safety assessment, as determined by the assessment plan, the candidate will have satisfied the requirements to obtain a Construction Skills Certification Scheme (CSCS) Card through the Joint Industry Board for Plumbing and Mechanical Engineering Services (JIB-PMES) at the appropriate grade.
Apprentices will progress to a wide range of employment opportunities in the workplace. Self-employment or starting a business may also be an option.
To find out more about how to become an apprentice or how to recruit an apprentice into your business, please contact York Business Partnership Team: Tel: 01904 770368 or email: firstname.lastname@example.org
"I chose to study the Plumbing Apprenticeship because I did some work experience previously and really enjoyed it, so knew that I wanted to have a career in plumbing.
I enjoy working in the workshop and learning new skills. When I’ve completed this apprenticeship, I hope to stay with this company to carry on improving my skills and gain more experience. I’d then like to open my own successful plumbing business."